GALKAN CABLE TRAYS and LADDERS SYSTEMS
GALKAN cable trays, cable ladders and accessories offer flexible solutions for all kinds of projects being large or small size.
GALKAN cable trays and cable ladders, which are used for the conveying of the electrical energy, accord with the technology of the building and bring about an flexible look after installation and they lower the costs as well.
GALKAN cable trays and cable ladders are used in hospitals, stadiums, schools, power plants, electricity distribution networks and cabling of the transformers, etc.
Wherever the electrical energy is to be conveyed with an cable, GALKAN cable trays, cable racks and accessories are used.
GALKAN cable trays feel proud to be available for serving the customers with its wide ranging stock and with on time delivery.
Engineers of our company are always ready to help you to select the most suitable material for you from GALKAN cable trays and cable ladders systems,
The following suggestions would help you to select in accordance with your aim.
1-Cable type and weight of the cable,
3-Conditions of the environment,
4-Form of installation,
5-Look of the cable trays and cable ladders assembly,
Power cables heat up under load and it is necessary to have ventilation holes with suitable values on the cable trays systems in order to dissipate this heat quickly. Cables should be laid on the cable trays and cable ladders by leaving a gap as the same size of the cable between cables and they should be fixed with clips on the cable trays and cable ladders, otherwise adverse conditions might take place during the high short circuit currents.
Power and low voltage installations should be separated from each other and separators should be used if these are to be laid on the same cable trays and cable ladders and the cable trays should be closed with cable trays covers and these should be grounded.
Weather conditions and the region have importance for the selection of the GALKAN cable trays and when you inform our engineers about the region and the weather conditions, cable carrying system, which will be suitable for your system, will be suggested.
GALKAN cable carrying systems are manufactured by the use of hot dip galvanisation method in accordance with the TS 914 and by the use of hot galvanisation method (pre-galvanised) in accordance with the TS 822 and in addition, they are also manufactured by the use of powder coating method.
GALKAN cable trays, cable ladders and accessories, whose manufacturing have been completed with hot dip galvanisation method in accordance with the TS 914, should be used on regions of overseas and on places, where there is excessive amount of humidity and painting over the galvanised coating should also be considered in order to increase the resistance against corrosion.
Few points to be considered when using GALKAN cable trays, cable ladders and accessories;
-The gap between brackets should not exceed 1,5 metres,
-Selection steel dowel that are suitable for the building,
-Execution of the assembly with the expert persons that know the system,
-Making sure that the system is grounded,
-Cable trays and ladders should not be loaded with excessive amount of cable weight. The load, which is foreseen by the standards, should not be exceeded.
-The system should only be used for the purpose of cable carrying,
-Installation gloves, which are suitable for the system, should be worn during the assembly,
-Fixing of the joints and brackets, which are used for the GALKAN cable trays, cable ladders, with bolts and flanged nuts completely,
- Making sure of the painting of the cut places that are made on the cable trays and cable ladders during the installation of the GALKAN cable trays, cable ladders with 90% Zinc based paint,
- GALKAN accessories should definitely be used for the assembly of the GALKAN cable trays, cable ladders.